You have no items in your shopping cart.
Fox Shock Hardware
Shock hardware to fit Fox rear shocks. Includes SRAM & X-Fusion hardware, which is also compatible with Fox shocks.
-
1/2" DU Bushing (Monocrome)
US$3.83In Stock
Straight replacement for shock eyelets in Modern Manitou, Modern RS, Fox, 5th Element, Marzocchi & Stratos Rear Shock Eyelets 1/2" ID x 1/2" Wide.
Learn More -
1/2" Low Friction Flanged Bushing Pair
US$10.59Please enquire
Flanged bushings for shock eyelets
Learn More
Installed as a pair with o-rings (not included) for new fitment or repair
Straight replacement for similar bushings from Fox, Trelleborg etc
Note these have a tighter ID than Fox & IGUS
They can be reamed to size after installation if they are too tightOut of stock
-
X-Fusion Flanged bushings for shock eyelets
Learn More
Straight replacement for genuine Fox flanged bushings provided the pin isn't worn
Installed as a pair with o-rings (not included) for repair
If you have a worn pin causing a knock, then use the green versions which have a tighter ID -
Bushing LF Flanged Oversize Pair (Fox)
US$11.77In Stock
Fox Flanged bushings (oversize) for shock eyelets
Installed as a pair with o-rings (not included) for repair
Thinner wall replacement for genuine Fox flanged bushings which are overly tight with oversize pin or undersize hole. Learn More -
Fitted Sealed Straight Axle Shock Hardware - One End (Shockcraft)
US$70.78Custom made to order
Premium sealed 1/2" shock hardware for bikes that like to get wet and muddy Custom fitted in our workshop to your shock's individual eyelet tolerances Includes stainless steel pin with Shockcraft's own sealing collars to keep contaminants out, and standard IGUS bushing For pin widths 25 mm and greater both sealing collars and spacers are used Allow 7 days lead time after receipt of shock Learn More -
Fitted Straight Axle Shock Hardware - One End (Shockcraft)
US$70.78Custom made to order
Shock hardware custom fitted in our workshop to your shock's individual eyelet tolerances. Widths from ~16mm on up. Virtually any diameter and bolt hole possible. Includes stainless steel pin with plastic collars and standard IGUS bushing Allow 7 days lead time after receipt of shock Learn More -
Mounting Hardware Kit - 12.7 x 10 x 22.2 mm, 9 Piece (Fox)
US$40.05Available on backorder
Shock Hardware Kit - 10 x 22.2 mm (FOX)
10 mm bolt hole, 0.874 inch (22.2mm) total width
Contains one pair of flanged polymer bushings, aluminim pin, two collars, two crush washers and o-rings.
Fits almost all Fox rear shocks.
Ref 214-11-001 FTW 779690
Fox Part Code; 803-03-317
Learn More -
Three piece shock hardware.
12.7mm (1/2") pin
10mm bolt hole
40mm total width
Black anodised aluminium.
Works with DU or IGUS bushings.
SRAM Part Code: 11.4115.012.620 Learn MoreOut of stock
-
Mounting Hardware Kit - 12.7 x 10 x 60 mm (Fox)
US$38.13Last One Left
Shock Hardware Kit - 10 x 60 mm, 7 piece (FOX)
10 mm bolt hole, 60 mm total width
Contains one pair of 1/2" flanged polymer bushings, stainless steel pin, two collars and o-rings
Fits almost all Fox rear shocks
Fits top end of shocks fitted to non-thru shaft Trek Fuel EX 2017-19
Fox Part Code: 803-03-321 Learn More -
Three piece shock hardware.
12.7mm (1/2") pin
6mm bolt hole
16mm total width
Black anodised aluminium.
Works with DU or IGUS bushings.
SRAM Part Code: 11.4115.012.320 Learn More -
Mounting Hardware Kit - 12.7 x 6 x 21.8 mm, 7 Piece (X-Fusion)
US$23.59In Stock Now
Shock mounting hardware by X-Fusion
Includes one pair of flanged polymer bushings, aluminium pin, two collars & o-rings
Pin with 6 mm bolt hole, 21.8 mm width & 1/2" (12.7 mm) diameter
Fits 1/2" eyelets in X-Fusion, Fox, RockShox, Manitou etc. shocks
X-Fusion Part Code: 42-XRKBU06218-101 Learn More -
Mounting Hardware Kit - 12.7 x 6 x 21.85 mm, 5 Piece (Fox)
US$31.77Available on backorder
Shock Hardware Kit - 6 x 21.85 mm, 5 piece (FOX)
6 mm bolt hole, 0.86 inch (21.85mm) total width
Contains one pair of flanged polymer bushings, aluminim pin, two collars and o-rings.
Fits almost all Fox rear shocks.
Ref 214-08-006 FTW RW160642
Fox Part Code; 803-03-143 Learn More -
Mounting Hardware Kit - 12.7 x 6 x 21.85 mm, 9 Piece (Fox)
US$29.85In Stock
Shock Hardware Kit - 6 x 21.85 mm, 9 piece (FOX) 6 mm bolt hole, 0.86 inch (21.84mm) total width Contains one pair of flanged polymer bushings, aluminim pin, two collars and o-rings. Fits almost all Fox rear shocks. Ref 214-08-006 FTW 793134 Fox Part Code: 803-03-258 Learn More -
Mounting Hardware Kit - 12.7 x 6 x 22.2 mm, 7 Piece (Fox)
US$29.49In Stock
Shock Hardware Kit - 6 x 22.2 mm, 7 piece (FOX)
6 mm bolt hole, 0.874 inch (22.2mm) total width
Contains one pair of flanged polymer bushings, aluminim pin, two collars and o-rings.
Fits almost all Fox rear shocks.
Ref 214-08-007 FTW 1020988
Fox Part Code; 803-03-259 Learn More -
Mounting Hardware Kit - 12.7 x 6 x 22.2 mm, 7 Piece (X-Fusion)
US$23.59In Stock Now
Shock mounting hardware by X-Fusion
Includes one pair of flanged polymer bushings, aluminium pin, two collars & o-rings
Pin with 6 mm bolt hole, 22.2 mm width & 1/2" (12.7 mm) diameter
Fits 1/2" eyelets in X-Fusion, Fox, RockShox, Manitou etc. shocks
X-Fusion Part Code: 42-XRKBU06222-101 Learn More -
Mounting Hardware Kit - 12.7 x 8 x 19 mm, 5 Piece (Fox)
US$31.77Available on backorder
Superseded Mounting Hardware Kit - 12.7 x 8 x 19 mm, 5 Piece (Fox)
Shock Hardware Kit - 8 x 19 mm, 5 piece (FOX)
8 mm bolt hole, 0.75 inch (19.05mm) total width
Contains one pair of flanged polymer bushings, aluminim pin, two collars and o-rings.
Fits almost all Fox rear shocks.
Ref 214-09-004 FTW 713329
Fox Part Code; 803-03-163 Learn More -
Mounting Hardware Kit - 12.7 x 8 x 19 mm, 5 Piece (Fox)
US$31.77Last One Left
Shock Hardware Kit - 8 x 19 mm, 5 piece (FOX)
8 mm bolt hole, 0.75 inch (0.19mm) total width
Contains one pair of flanged polymer bushings, aluminim pin, two collars and o-rings.
Fits almost all Fox rear shocks.
Ref 214-09-004 FTW 824507
Fox Part Code; 803-03-277 Learn More -
Mounting Hardware Kit - 12.7 x 8 x 20 mm, 5 Piece (Fox)
US$31.77Available on backorder
Shock Hardware Kit - 8 x 20 mm, 5 piece (FOX)
8 mm bolt hole, 0.787 inch (20 mm) total width
Contains one pair of flanged polymer bushings, aluminim pin, two collars and o-rings.
Fits almost all Fox rear shocks.
Ref 214-09-043 FTW 169558
Fox Part Code; 803-03-236 Learn More -
Mounting Hardware Kit - 12.7 x 8 x 20 mm, 7 Piece (X-Fusion)
US$23.59In Stock Now
Shock mounting hardware by X-Fusion
Includes one pair of flanged polymer bushings, aluminium pin, two collars & o-rings
Pin with 8 mm bolt hole, 20 mm width & 1/2" (12.7 mm) diameter
Fits 1/2" eyelets in X-Fusion, Fox, RockShox, Manitou etc. shocks
X-Fusion Part Code: 42-XRKBU08200-101 Learn More -
Three piece shock hardware.
12.7mm (1/2") pin
8mm bolt hole
21.8mm total width
Black anodised aluminium.
Works with DU or IGUS bushings.
SRAM Part Code: 11.4118.091.807 Learn More -
Mounting Hardware Kit - 12.7 x 8 x 21.8 mm, 7 Piece (X-Fusion)
US$23.59In Stock Now
Shock mounting hardware by X-Fusion
Includes one pair of flanged polymer bushings, aluminium pin, two collars & o-rings
Pin with 8 mm bolt hole, 21.8 mm width & 1/2" (12.7 mm) diameter
Fits 1/2" eyelets in X-Fusion, Fox, RockShox, Manitou etc. shocks
X-Fusion Part Code: 42-XRKBU08218-101 Learn More -
Mounting Hardware Kit - 12.7 x 8 x 21.85 mm, 5 Piece (Fox)
US$31.77Last One Left
Shock Hardware Kit - 8 x 21.85 mm, 5 piece (FOX)
8 mm bolt hole, 0.86 inch (21.85mm) total width
Contains one pair of flanged polymer bushings, aluminim pin, two collars and o-rings.
Fits almost all Fox rear shocks.
Ref 214-09-066 FTW 747764
Fox Part Code; 803-03-279
Old Fox Part Code; 803-03-165 Learn More -
Mounting Hardware Kit - 12.7 x 8 x 22.2 mm, 7 Piece (Fox)
US$31.77Available on backorder
Shock Hardware Kit - 8 x 22.2 mm, 7 piece (FOX)
8 mm bolt hole, 0.874 inch (22.2mm) total width
Contains one pair of flanged polymer bushings, aluminim pin, two collars, two crush washers and o-rings.
Fits almost all Fox rear shocks.
Ref 214-09-007 FTW 787390
Fox Part Code; 803-03-280
Photo of prior model. Fitment identical. Learn More -
Mounting Hardware Kit - 12.7 x 8 x 22.2 mm, 7 Piece (X-Fusion)
US$23.59In Stock Now
Shock mounting hardware by X-Fusion
Includes one pair of flanged polymer bushings, aluminium pin, two collars & o-rings
Pin with 8 mm bolt hole, 22.2 mm width & 1/2" (12.7 mm) diameter
Fits 1/2" eyelets in X-Fusion, Fox, RockShox, Manitou etc. shocks
X-Fusion Part Code: 42-XRKBU08222-101 Learn More -
Mounting Hardware Kit - 12.7 x 8 x 25 mm, 7 Piece (Fox)
US$31.77In Stock
Shock Hardware Kit - 8 x 25 mm, 7 piece (FOX)
8 mm bolt hole, 25mm total width
Contains one pair of flanged polymer bushings, aluminim pin, two collars, two crush washers and o-rings.
Fits almost all Fox rear shocks.
Fox Part Code; 803-03-328 Learn More
Shop By
Shopping Options
- Frame Brand
- Bolt Hole Diameter
- Length of Mounting Hardware
- Eyelet Internal Diameter
- Bushing Type
- Bushing Internal Diameter (ID)
- Bushing Outside Diameter (OD)
- Bushing Length
Recent Posts
-
Good suspension should be stable and supportive while being planted, y... -
Deans Bank 6 Hour, Wanaka Bike Wanaka is back with their Deans Bank r... -
Bike of the Month, October 2023 Transition Smuggler with Ready Mix Tu...
Categories
Instagram
